An excellent DIY solution if you are on a budget.
We have a great solution for your pool area.
Seperate suction and return line with an independent pump and an option for a solar controller. Wether it is a temporary solution and you can take your equipment as you scale up.
Suction lines directly into the pool, a solar pump to service the solar collector and a single return line to help circulate cool water and warm water, using a proper solar collector. We have optimised a solar collector to fit into a standard piece of ply wood. Which you can modulate into a series of panels to help heat your pool the sunbather way.
We have 3 panels available:
1/ 2.88 sqm per 1200mm x 2400mm to fit to a piece of ply wood, add some roofing iron to add that little piece of magic
2/ 2.88 sqm per 1200mm x 2400mm to fit to a piece of ply wood, pipes, fittings valves and controller
3/ 2.88 sqm per 1200mm x 2400mm to fit to a piece of ply wood, pipes, fittings valves and NO controller included
This is a modular system you can piece together as a hobby type system. It can sit in your garden on a small scale. This system is not designed to be installed on a large scale as it would not be cost effective.
Designed to sit on the ground next to your pool.
Very rudimentary and will only offer a small amount of value in comparison to a regular system.
This is designed for a para rubber, Intex style pool and not recommended for a standard pool with regular skimmer/ pool filtration.
Pressure and flow will be effected. This system will not work on a roof or any other fixture above 1.8m.
2.88sqm panel kit includes:
- Dual suction points at 1m apart(T fitting into a single line)
- 18m of pipe
- Fittings
- 2 x 2 way valves
- 1 x non return valve
- .35hp pump
- Controller
- Return eyeball
- Fittings into panel system
- Glue PVC
- Silicon glue
2.88sqm panel only only includes:
- Manifold 40mm pipe
- Collector
2.88sqm panel kit - NO controller includes:
- Dual suction points at 1m apart(T fitting into a single line)
- 18m of pipe
- Fittings
- 2 x 2 way valves
- 1 x non return valve
- .35hp pump
- Return eyeball
- Fittings into panel system
- Glue PVC
- Silicon glue
Required but not included:
- 18mm H3.2 plywood or similar
- H4 timber for base frame
- Fixings and other misc items
Shipping additional cost and subject to final quote
