Downunder roller gallery


In Ground Casing

In deck with 5mm negative detail, looks sharp

Joist prep work on a floating deck

In deck prep work ready for decking

In deck complete 

This is a great installation using an In deck unit, over a cover pit 1.4m down and 1m across. Then the concrete team boxed around the unit and tied into the rebar. The cover was 20m long so we used 500mm extension brackets to lower the cover so the Downunder could accomodate the cover. 

Dual lid installation. The pool is 6m wide. The maximum pool width for our 5.6m Downunder is 5.5m wide. Then we need to do a dual lid, off set layout. This means if you only want a quick dip, only remove 1/2 the cover. Our maximum cover length is approx 30m. 

This L shaped pool with a hinged 4mm thermal blanket. 

Joist prep for an in deck roller unit

A California inspired poured concrete coping edge looking sharp with an in ground Downunder unit.

In deck Downunder unit

In ground Downunder ready for tiles to be installed

In deck Downunder 

In ground Downunder with some epic coloured concrete detail to really punch out the detail