The AstralPool range of Heat Pumps now includes both standard technology and the new Inverter technology. Inverter technology allows the swimming pool heat pump to reach an extremely high COP compared with normal heat pumps in the market. The unique inverter technology reduces the speed of the unit as it reaches the desired temperature. This greatly saves on energy and enables you to enjoy swimming quicker and at a constant temperature.The Viron Inverter Heat Pump range uses R32 Gas Refridgerant, which offers higher efficiency and longer pipe runs and requires less refrigerant volume per Kw. This means quicker heating times and less energy used to heat up your pool. Reduced electricity consumption by 10% and lower environmental impact.
INVERTER TECHNOLOGY
AstralPool’s range of Inverter technology heat pumps uses up to 15-30% less power consumption when compared to a non-inverter heat pump.
SILENT MODE
The Inverter technology also reduces the noise due to a unique internal ventilation design,
the addition of silent mode allows you to operate at anytime without disturbing the neighbours
WIFI CONTROL
The Viron range and Top Discharge heat pumps come included with WiFi. Also available as an optional add on for all other models
ENVIRONMENTALLY FRIENDLY
AstralPool Heat Pumps are an environmentally friendly option to heat your pool. Operating on a similar principle to your refrigerator or air conditioner, Heat Pumps use environmentally friendly refrigerant gas that extracts the latent heat from the air and transfers this heat into the pool water.
ENERGY EFFICIENT
For every 1 kW of electricity consumed, AstralPool Heat Pumps will collect up to 13 kW of heat from the atmosphere. Sunshine is not necessary and your Heat Pump will continue to heat your pool in air temperatures as low as 7 degrees. So even if the nights are cold, or the days leading up to the weekend are cool, your AstralPool Heat Pump can heat and maintain your pool water temperature at a comfortable swimming temperature.
QUIET COMPRESSOR
A nearly silent compressor moves the refrigerant gas through a coil (called evaporator) through which air is forced and collects heat from the surrounding atmosphere. The now superheated refrigerant gas then passes through a titanium heat exchanger (called a condenser) which transfers the heat into the pool water and the cycle starts again.
